3D 90 Degree Elbow
The 3D 90-degree elbow refers to a 90-degree elbow with a bending radius that is three times the nominal diameter of the pipe. Compared with ordinary elbows, 3D 90 degree elbows have a larger bending radius, which can make the fluid turn more smoothly in the pipeline, reduce the pressure loss and the impact of the fluid on the pipe wall, and is suitable for occasions with high requirements for fluid transportation.

Size Range
1/2″~48″ (DN15~DN1200)

Pressure Ratings
3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS

Material Grades
304/304L, 316/316L, 316Ti, 321, 317L, S31803, S31254, A234 WPB, 20 etc.

Manufacturing Processes
Cutting, hot pressing, cold processing, hot processing, welding, heat treatment.

Product Standards
ASME B16.9, GB/T12459, GB/T13401, GB/T10752, SH3408, SH3409, HG/T21631, HG/T21635, SY/T0510, JIS2311/2312/2313, DL/T695, EN 10253 etc.
How We Classify Butt Weld 3D 90 Degree Elbow?
Pipelink possesses extensive expertise in providing our clients with various types of butt-weld elbows, which can be classified based on the following factors.


By Material
Carbon steel butt weld elbows
They have a lower cost and higher strength, capable of withstanding certain pressures, commonly used in pipeline systems for transporting general media such as water, steam, and oil, such as ordinary industrial water supply pipelines and low-pressure steam pipelines.
Stainless steel butt weld elbows
They possess good corrosion resistance, suitable for transporting corrosive media, such as pipelines in the chemical industry for transporting acidic and alkaline liquids. Common materials include 304 and 316 stainless steel elbows.
Alloy steel butt weld elbows
They can maintain good performance under harsh conditions such as high temperature and high pressure, suitable for high-temperature and high-pressure pipelines in petrochemical applications and main steam pipelines in power plants.
By Manufacturing Process

Hot-pressed elbow: made by heating the blank and pressing, this elbow has uniform wall thickness and good appearance quality, which is suitable for mass production and is more common in large-scale pipeline installation projects.
Medium plate welding: Half of the elbow profile is made on the press with the middle plate, and then the two sections are welded together, which is generally used to make large-diameter elbows above DN700.
By Caliber Size
Small caliber elbow: Small diameter elbows: Generally refers to elbows with a nominal diameter of less than DN50, commonly used in connecting pipes for small equipment or in fine chemical low flow pipelines.
Medium diameter elbow: The nominal diameter is between DN50 - DN300, which is a widely used category, such as the piping system in ordinary industrial plants.
Large diameter elbows: nominal diameter greater than DN300, used in large-scale projects such as large water supply pipelines and oil transportation pipelines.
Hot Tags: 3d 90 degree elbow, China 3d 90 degree elbow manufacturers, suppliers, factory, 1 inch elbow cpvc, 18 inch culvert pipe elbow, alloy steel elbow, funny pipe 90 degree elbow, ss threaded elbow, stainless steel elbow fitting
You Might Also Like
Send Inquiry






